Skip to content

Quality assured

Readymix Concrete

Readymix Concrete

Competitive concrete & floor screed rates Call us NowCall now: 01483 498 192

Never over/under order again! pay for what you lay

Ready-Mix Concrete

Using our fleet of six or eight wheel trucks, Axtell Mixtrucks can deliver ready-mixed concrete direct to your project site, and each of our vehicles are computerised to ensure the correct mix is produced every time. We operate throughout the Surrey, West Sussex and Hampshire areas, calling on over 20 years of experience to provide the highest standard every time.

We work hard to conform to the most up-to-date standards regarding quality of aggregates, safe practices and efficient service, and are therefore fully accredited by the BSI for your peace of mind. In fact, Axtell is the only readymix-accredited supplier that operates volumetric concrete mixers in the area.

Other Services Available
  • Concrete Services
  • Volumetric Concrete
  • On-Site Mixed Concrete
  • Floor Screed
  • Concrete Floors
  • Concrete Foam
  • Computerised Mix So Only Pay For What You Use.

    The ability to be flexible with the mix design is one of the main benefits of readymix concrete, with all of our volumetric mix trucks containing 4 - 20mm stone, sharp sand, cement, water and a range of concrete enhancing additives. The mix can then be produced to requirement on site, and altered accordingly due to changes in application or weather conditions.

    If you are unsure as to the mix you require, take a look at our “Which Mix for my Application?” table below, or contact the team at Axtell Mixtrucks today for expert advice.

    Which Mix for my Application?

    Domestic - Trade - Commercial - Utility

    Foundation
    Small Wall C15 Read

    "Design Strength Mix" achieving 15 Newton/28 day strength.
    Consists of cement, 4-20mm stone, graded sand and water.
    Can be supplied with 10mm stone for specialist applications, subject to a cost premium. Super Plasticiser (WRA) is added to this mix to give extra strength, workability and placement properties. Agg Size:10 - mm:20

    Large Wall C20 Read

    Design Strength Mix" achieving 20 Newton/28 day strength. Consists of cement, 4-20mm stone, graded sand and water. Can be supplied with 10mm stone for specialist applications, subject to a cost premium. Super Plasticiser (WRA) is added to this mix to give extra strength, workability and placement properties. Agg Size:10 - mm:20

    Shed C20 Read

    "Design Strength Mix" achieving 15 Newton/28 day strength. Consists of cement, 4-20mm stone, graded sand and water. Can be supplied with 10mm stone for specialist applications, subject to a cost premium. Super Plasticiser (WRA) is added to this mix to give extra strength, workability and placement properties. Agg Size:10 - mm:20

    Steps C10 Read

    "Design Strength Mix" achieving 10 Newton/28 day strength. Consists of cement, 4-20mm stone, graded sand and water. Can be supplied with 10mm stone for specialist applications, subject to a cost premium. Super Plasticiser (WRA) is added to this mix to give extra strength, workability and placement properties. Agg Size:10 - mm:20

    Conservatory C15 Read

    "Design Strength Mix" achieving 15 Newton/28 day strength. Consists of cement, 4-20mm stone, graded sand and water. Can be supplied with 10mm stone for specialist applications, subject to a cost premium. Super Plasticiser (WRA) is added to this mix to give extra strength, workability and placement properties. Agg Size:10 - mm:20

    Garage C20 Read

    "Design Strength Mix" achieving 20 Newton/28 day strength. Consists of cement, 4-20mm stone, graded sand and water. Can be supplied with 10mm stone for specialist applications, subject to a cost premium. Super Plasticiser (WRA) is added to this mix to give extra strength, workability and placement properties. Agg Size:10 - mm:20

    House / Extension (s/s) C20 Read

    "Design Strength Mix" achieving 20 Newton/28 day strength. Consists of cement, 4-20mm stone, graded sand and water. Can be supplied with 10mm stone for specialist applications, subject to a cost premium. Super Plasticiser (WRA) is added to this mix to give extra strength, workability and placement properties. Agg Size:10 - mm:20

    House / Extension (d/s) C25 Read

    "Design Strength Mix" achieving 25 Newton/28 day strength. Consists of cement, 4-20mm stone, graded sand and water. Can be supplied with 10mm stone for specialist applications, subject to a cost premium. Super Plasticiser (WRA) is added to this mix to give extra strength, workability and placement properties. Agg Size:10 - mm:20

    Workshop (Reinforced) C30 Read

    "Design Strength Mix" achieving 30 Newton/28 day strength. Consists of cement, 4-20mm stone, graded sand and water. Super Plasticiser (WRA) is added to this mix to give extra strength, workability and placement properties. Agg Size:10 - mm:20

    Drainage 8:1 Read

    "Nominal Mix" consisting of cement, 4-20mm stone, graded sand and water. Can be supplied with 10mm stone for specialist applications, subject to a cost premium. The numbers denote the ratio of all-in stone and sand : cement. Agg Size:10 - mm:20

    Trench Fill GEN1 Read

    "Designated Mix" consisting of cement, 4-20mm stone, graded sand and water. Can be supplied with 10mm stone for specialist applications, subject to a cost premium. Agg Size:10 - mm:20

    Septic Tank C40 Read

    "Design Strength Mix" achieving 40 Newton/28 day strength. Consists of cement, 4-20mm stone, graded sand and water. Can be supplied with 10mm stone for specialist applications, subject to a cost premium. Super Plasticiser (WRA) is added to this mix to give extra strength, workability and placement properties. Agg Size:10 - mm:20

    Paving
    Paths C15 Read

    "Design Strength Mix" achieving 15 Newton/28 day strength. Consists of cement, 4-20mm stone, graded sand and water. Can be supplied with 10mm stone for specialist applications, subject to a cost premium. Super Plasticiser (WRA) is added to this mix to give extra strength, workability and placement properties.Agg Size:10 - mm:20

    Pavement PAV1 Read

    This is a "Designated Mix" consisting of cement, 4-20mm stone, graded sand and water. Can be supplied with 10mm stone for specialist applications, subject to a cost premium. This mix has an air entrainment additive which forms equal size air bubbles in the finished concrete to protect the finished surface from freeze-thaw cycles. Particularly suitable for outside paved areas.Agg Size:10 - mm:20

    Driveway PAV2 Read

    This is a ‘Designated Mix’ consisting of cement, 4-20mm stone, graded sand and water. Can be supplied with 10mm stone for specialist applications, subject to a cost premium. This mix has an air entrainment additive which forms equal size air bubbles in the finished concrete to protect the finished surface from freeze-thaw cycles. Particularly suitable for outside paved areas.Agg Size:10 - mm:20

    Steps C15 Read

    "Design Strength Mix" achieving 15 Newton/28 day strength. Consists of cement, 4-20mm stone, graded sand and water. Can be supplied with 10mm stone for specialist applications, subject to a cost premium. Super Plasticiser (WRA) is added to this mix to give extra strength, workability and placement properties.Agg Size:10 - mm:20

    Patio C20 Read

    "Design Strength Mix" achieving 20 Newton/28 day strength. Consists of cement, 4-20mm stone, graded sand and water. Can be supplied with 10mm stone for specialist applications, subject to a cost premium. Super Plasticiser (WRA) is added to this mix to give extra strength, workability and placement properties.Agg Size:10 - mm:20

    Kennels C30 Read

    "Design Strength Mix" achieving 30 Newton/28 day strength. Consists of cement, 4-20mm stone, graded sand and water. Super Plasticiser (WRA) is added to this mix to give extra strength, workability and placement properties.Agg Size:10 - mm:20

    HGV Park C40 Read

    "Design Strength Mix" achieving 40 Newton/28 day strength. Consists of cement, 4-20mm stone, graded sand and water. Can be supplied with 10mm stone for specialist applications, subject to a cost premium. Super Plasticiser (WRA) is added to this mix to give extra strength, workability and placement properties.Agg Size:10 - mm:20

    Ext Hard Standing (reinforced) C30 Read

    "Design Strength Mix" achieving 30 Newton/28 day strength. Consists of cement, 4-20mm stone, graded sand and water. Super Plasticiser (WRA) is added to this mix to give extra strength, workability and placement properties.Agg Size:10 - mm:20

    Ext Hard Standing (Un-reinforced) PAV1 Read

    This is a "Designated Mix" consisting of cement, 4-20mm stone, graded sand and water. Can be supplied with 10mm stone for specialist applications, subject to a cost premium. This mix has an air entrainment additive which forms equal size air bubbles in the finished concrete to protect the finished surface from freeze-thaw cycles. Particularly suitable for outside paved areas.Agg Size:10 - mm:20

    Reinforced bases floors / Oversites
    Conservatory C20 Read

    "Design Strength Mix" achieving 20 Newton/28 day strength. Consists of cement, 4-20mm stone, graded sand and water. Can be supplied with 10mm stone for specialist applications, subject to a cost premium. Super Plasticiser (WRA) is added to this mix to give extra strength, workability and placement properties.Agg Size:10 - mm:20

    Garage C20 Read

    "Design Strength Mix" achieving 20 Newton/28 day strength. Consists of cement, 4-20mm stone, graded sand and water. Can be supplied with 10mm stone for specialist applications, subject to a cost premium. Super Plasticiser (WRA) is added to this mix to give extra strength, workability and placement properties.Agg Size:10 - mm:20

    Shed C20 Read

    "Design Strength Mix" achieving 20 Newton/28 day strength. Consists of cement, 4-20mm stone, graded sand and water. Can be supplied with 10mm stone for specialist applications, subject to a cost premium. Super Plasticiser (WRA) is added to this mix to give extra strength, workability and placement properties.Agg Size:10 - mm:20

    Greenhouse C20 Read

    "Design Strength Mix" achieving 20 Newton/28 day strength. Consists of cement, 4-20mm stone, graded sand and water. Can be supplied with 10mm stone for specialist applications, subject to a cost premium. Super Plasticiser (WRA) is added to this mix to give extra strength, workability and placement properties.Agg Size:10 - mm:20

    House / Extension C25 Read

    "Design Strength Mix" achieving 25 Newton/28 day strength. Consists of cement, 4-20mm stone, graded sand and water. Can be supplied with 10mm stone for specialist applications, subject to a cost premium. Super Plasticiser (WRA) is added to this mix to give extra strength, workability and placement properties.Agg Size:10 - mm:20

    Workshop C30 Read

    "Design Strength Mix" achieving 30 Newton/28 day strength. Consists of cement, 4-20mm stone, graded sand and water. Super Plasticiser (WRA) is added to this mix to give extra strength, workability and placement properties.Agg Size:10 - mm:20

    Commercial Building C35 Read

    "Design Strength Mix" achieving 35 Newton/28 day strength. Consists of cement, 4-20mm stone, graded sand and water. Can be supplied with 10mm stone for specialist applications, subject to a cost premium. Super Plasticiser (WRA) is added to this mix to give extra strength, workability and placement properties.Agg Size:10 - mm:20

    Un-reinforced bases floors / Oversites
    Conservatory C20 Read

    "Design Strength Mix" achieving 20 Newton/28 day strength. Consists of cement, 4-20mm stone, graded sand and water. Can be supplied with 10mm stone for specialist applications, subject to a cost premium. Super Plasticiser (WRA) is added to this mix to give extra strength, workability and placement properties.Agg Size:10 - mm:20

    Garage C20 Read

    "Design Strength Mix" achieving 20 Newton/28 day strength. Consists of cement, 4-20mm stone, graded sand and water. Can be supplied with 10mm stone for specialist applications, subject to a cost premium. Super Plasticiser (WRA) is added to this mix to give extra strength, workability and placement properties.Agg Size:10 - mm:20

    Shed C20 Read

    "Design Strength Mix" achieving 20 Newton/28 day strength. Consists of cement, 4-20mm stone, graded sand and water. Can be supplied with 10mm stone for specialist applications, subject to a cost premium. Super Plasticiser (WRA) is added to this mix to give extra strength, workability and placement properties.Agg Size:10 - mm:20

    Greenhouse C20 Read

    "Design Strength Mix" achieving 20 Newton/28 day strength. Consists of cement, 4-20mm stone, graded sand and water. Can be supplied with 10mm stone for specialist applications, subject to a cost premium. Super Plasticiser (WRA) is added to this mix to give extra strength, workability and placement properties.Agg Size:10 - mm:20

    House / Extension C30 Read

    "Design Strength Mix" achieving 30 Newton/28 day strength. Consists of cement, 4-20mm stone, graded sand and water. Super Plasticiser (WRA) is added to this mix to give extra strength, workability and placement properties.Agg Size:10 - mm:20

    Floor Screed 4:1 Read

    This is a high strength screed mix consisting of four parts graded sand to one part cement, and water. No stone content. Retarding agents added upon request. Suitable for floor screeds.Agg Size:10 - mm:20

    Civil Engineering
    Foam Concrete C4 Read

    Supplied in the form of either Foam Concrete with 4-20mm stone, or Foam Mortar, without stone. Each mix additionally consists of cement, graded sand and water. The mix has a foaming agent added which entrains air in to the concrete to give high workability and levelling properties, achieving 8 Newton/28 day strength. Suitable for void/trench/roadfill applications. Specified by Gas Board and DOT.Agg Size:10 - mm:20

    Foam Mortar C4 Read

    Supplied in the form of either Foam Concrete with 4-20mm stone, or Foam Mortar, without stone. Each mix additionally consists of cement, graded sand and water. The mix has a foaming agent added which entrains air in to the concrete to give high workability and levelling properties, achieving 8 Newton/28 day strength. Suitable for void/trench/roadfill applications. Specified by Gas Board and DOT.Agg Size:10 - mm:20

    Road Sub-base CBM3 Read

    Dry Lean / Semi Dry Mix (Cement Bound Material) consisting of cement, 4-20mm stone, graded sand and minimal water. The numbers denote the ratio of all-in stone and sand : cement.Agg Size:10 - mm:20

    Foam Concrete GEN1 Read

    "Designated Mix" consisting of cement, 4-20mm stone, graded sand and water. Can be supplied with 10mm stone for specialist applications, subject to a cost premium.Agg Size:10 - mm:20

    Agricultural

    Livestock
    Silage Clamps RC45 Read

    "Designated Mix" achieving 45 Newton/28 day strength. Consists of a minimum cement content, 4-20mm stone, graded sand and water. Can be supplied with 10mm stone for specialist applications, subject to a cost premium. A water cement ratio mix to a 0.50 value.Agg Size:10 - mm:20

    Livestock Housing RC45 Read

    "Designated Mix" achieving 45 Newton/28 day strength. Consists of a minimum cement content, 4-20mm stone, graded sand and water. Can be supplied with 10mm stone for specialist applications, subject to a cost premium. A water cement ratio mix to a 0.50 value.Agg Size:10 - mm:20

    Stables RC45 Read

    "Designated Mix" achieving 45 Newton/28 day strength. Consists of a minimum cement content, 4-20mm stone, graded sand and water. Can be supplied with 10mm stone for specialist applications, subject to a cost premium. A water cement ratio mix to a 0.50 value.Agg Size:10 - mm:20

    Inside Storage
    Barn Floors RC35 Read

    "Designated Mix" achieving 45 Newton/28 day strength. Consists of a minimum cement content, 4-20mm stone, graded sand and water. Can be supplied with 10mm stone for specialist applications, subject to a cost premium. A water cement ratio mix to a 0.50 value.Agg Size:10 - mm:20

    Equipment Storage RC35 Read

    "Designated Mix" achieving 45 Newton/28 day strength. Consists of a minimum cement content, 4-20mm stone, graded sand and water. Can be supplied with 10mm stone for specialist applications, subject to a cost premium. A water cement ratio mix to a 0.50 value.Agg Size:10 - mm:20

    Grain / Feed Storage RC35 Read

    "Design Strength Mix" achieving 35 Newton/28 day strength. Consists of cement, 4-20mm stone, graded sand and water. Can be supplied with 10mm stone for specialist applications, subject to a cost premium. Super Plasticiser (WRA) is added to this mix to give extra strength, workability and placement properties.Agg Size:10 - mm:20

    Paving
    External Paving PAV2 Read

    This is a ‘Designated Mix’ consisting of cement, 4-20mm stone, graded sand and water. Can be supplied with 10mm stone for specialist applications, subject to a cost premium. This mix has an air entrainment additive which forms equal size air bubbles in the finished concrete to protect the finished surface from freeze-thaw cycles. Particularly suitable for outside paved areas.Agg Size:10 - mm:20

    Yards RC40 Read

    "Designated Mix" achieving 40 Newton/28 day strength. Consists of a minimum cement content, 4-20mm stone, graded sand and water. Can be supplied with 10mm stone for specialist applications, subject to a cost premium. A water cement ratio mix to a 0.55 valueAgg Size:10 - mm:20

    Next Day & Same Day Service

    Prompt and efficient service mixed to your exact requirements Call now: 01483 498 192

    Request A Callback

    CPA FTA BSI CITB

    We are proud members of the Construction Plant Hire Association, the Freight Transport Association, the Construction Industry Training Board and we are fully BSI accredited.